2014 Honda Rincon 680 Specs
Honda Rincon 680 In-Depth Guide
The Honda Rincon 680 is an all-terrain vehicle(ATV) manufactured by the Honda Motors Co. since 2003. It weighs 600lbs, has a 38 horsepower 675cc engine(was 649cc from 2003-2006) and can reach a top speed of 63MPH. The Honda Rincon 680 has an independent rear suspension and a generous seat height of 34.5 inches making it comfortable to ride for extended periods of time.
If you enjoy taking your sport ATV off road you'll appreciate the peace of mind in knowing the Honda Rincon is built by a company that strives to develop low-emission technology for future motorcycles, ATVs, scooters and personal watercraft. The 2009 Honda Rincon ATV sports an independent double-wishbone suspension in front AND in the rear, most ATVs go with a swing-arm in rear.
This model meets the same level of ride comfort we've all come to expect from the Honda Rincon lineup of all-terrain vehicles. The 2009 Honda Fourtrax Rincon model ID number is TRX680FA and it's available in red, olive, blue and the trademarked NaturalGear Camouflage graphics.
See also
Honda Rincon 680 Specs
- Model Type: Utility
- BASE Price: $7,999.00
- Engine Type: Single-Cylinder
- Number of Cylinders: 1
- Honda Rincon 680 Top Speed: 63mph stock with rev limiter
- Engine Stroke: 4-Stroke
- Valve Configuration: OHV
- Honda Rincon 680 Engine Size: 675cc (649cc on 2003-2006 models)
- Honda Rincon 680 Horsepower: 38HP
- Carburetion Type: Fuel Injected
- Transmission Type: Automatic
- Honda Rincon 680 Oil Capacity: 3.1 quarts w/ filter change
- Oil Type: Honda HP4 or similar 10W40 ATV oil
- Number Of Speeds: 3
- Honda Rincon 680 Seat Height: 34.5 inches
- Primary Drive: Shaft
- Reverse Gear: Yes
- Front Tire Size: 25 X 8-12 inches
- Rear Tire Size: 25 X 10-12 inches
- Front Brake Type: Dual Hydraulic Disc
- Rear Brake Type: Hydraulic Disc
- Wheelbase: 50.8 inches
- Honda Rincon 680 Weight: 600lbs
- Honda Rincon 680 Fuel Capacity: 4.3 gallons
Honda Rincon Oil and Filter Change Information
- Warm the engine to operating temperature
- Let engine cool for 3-5 minutes
- Remove 17mm oil plug bolt from the oil pan
- Drain old oil into a drain pan
- Remove and replace oil filter(optional)
- Re-install drain plug and tighten to spec(25NM)
- Add 3 quarts of HP4 or similar 10w40 oil
- Check dipstick and add a little more if needed
Regularly changing the engine oil of your Honda Rincon ATV will prevent premature engine wear and help it last longer. You'll need a drain pan to collect the old oil, some shop rags to clean up any oil spillage, a socket set preferably with torque wrench, download a Honda Rincon 680 manual(optional) and fresh oil and filter.
Source: https://www.atvstyle.com/honda-rincon-680-specs/
Tidak ada komentar: